Jump to content
php.lv forumi

Mailer-Daemon nesūta emailu

gunars

By gunars
in Instalācija un konfigurācija

 Share

Recommended Posts

gunars Newbie

gunars

Posted
Posted (edited)

Sveicināti,

 

Laiku atpakaļ ir uzradusies kļūda, ka no servera nesūta ēpasta ziņojumus. Agrāk visus ēpastu sūtija ļoti labi. Atverot mail/www-data var redzēt, ka visi ziņojumi tiek bloķēti un netiek nosūtīti, piemēram,:

 

From MAILER-DAEMON Wed Jul 14 15:20:19 2010
Return-path: <>
Envelope-to: www-data@zip
Delivery-date: Wed, 14 Jul 2010 15:20:19 -0400
Received: from Debian-exim by zip with local (Exim 4.69)
id 1OZ7VD-0003r0-NT
for www-data@zip; Wed, 14 Jul 2010 15:20:19 -0400
X-Failed-Recipients: [email protected]
Auto-Submitted: auto-replied
From: Mail Delivery System <Mailer-Daemon@zip>
To: www-data@zip
Subject: Mail delivery failed: returning message to sender
Message-Id: <E1OZ7VD-0003r0-NT@zip>
Date: Wed, 14 Jul 2010 15:20:19 -0400

This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

 [email protected]
   Mailing to remote domains not supported

------ This is a copy of the message, including all the headers. ------

Return-path: <www-data@zip>
Received: from www-data by zip with local (Exim 4.69)
(envelope-from <www-data@zip>)
id 1OZ7VD-0003qy-Ma
for [email protected]; Wed, 14 Jul 2010 15:20:19 -0400
To: [email protected]
Subject: =?UTF-8?B?VGV2aSBrxIFkcyBzYW3Eq8S8b2ph?=
MIME-Version: 1.0
Content-type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
From: Labotsmansdomēns.lv <[email protected]>
Reply-To: Labotsmansdomēns.lv <[email protected]>
Message-Id: <E1OZ7VD-0003qy-Ma@zip>
Date: Wed, 14 Jul 2010 15:20:19 -0400

Sveiki, ZaC, 
vēstules teksts

Varbūt kādam ir pieredze, kur varētu būt kļūda? Palasiet ievadīto ziņojumu. Nesūta arī uz ēpasta adresēm, kuras es 100% zinu, ka ir īstas.

Paldies

Edited by gunars
Link to comment
Share on other sites
gunars Newbie

gunars

Posted
  • Author
Posted (edited)

Es saprotu, ka tur var atrast kaudzēm visādas informācijas, bet tāpēc es pateicu "paldies", tam , kas palīdzēs. Tad jau var izņemt visu forumu un norādīt linku uz googli;) Kāds ir tavs ieteikums? Sanāk, ka mana lapa ir spam listē?

Edited by gunars
Link to comment
Share on other sites
gunars Newbie

gunars

Posted
  • Author
Posted (edited)

domā labot php.ini?

patreiz:

[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25

; For Win32 only.
;sendmail_from = [email protected]

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
sendmail_path = /usr/sbin/sendmail -t -i

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

pieliekot klāt useri un pass?

Edited by gunars
Link to comment
Share on other sites
Rincewind Newbie

Rincewind

Posted
Posted

>>domā labot php.ini?

Domāju ka paša mailservera konfigs.

Ja tev ir WinXP vari pamēģināt ar telnetu nosūtīt mailu pa taisno bez PHP. Vistai un 7 laikam telnets izņemts. Komandrindā jāraksta:

 

telnet tavsmailserveris.lv 25 (25 ir SMTP ports, servera adresi nomaini uz savējo)

HELO tavsmailserveris.lv

MAIL FROM: [email protected] (ieraksti lokālo adresi, to no kuras PHP sūta)

RCPT TO: [email protected] (ieraksti savu adresi citā domēnā, inbox/gmail/utt)

DATA

saraksti kaut kādu tekstu

. (punkts un Enter lai beigtu teksta ievadi un nosūtītu mailu)

Link to comment
Share on other sites
gunars Newbie

gunars

Posted
  • Author
Posted (edited) 

#########
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# This file is generated dynamically from the files in
# the conf.d/ directory, or from exim4.conf.template respectively.
# Additional information is read from update-exim4.conf.conf
# This version of the file was created from the directory /etc/exim4
# Any changes you make here will be lost.
# See /usr/share/doc/exim4-base/README.Debian.gz and update-exim4.conf(8)
# for instructions of customization.
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
#########

exim_path = /usr/sbin/exim4

.ifndef CONFDIR
CONFDIR = /etc/exim4
.endif

UPEX4CmacrosUPEX4C = 1
##############################################
# the following macro definitions were created
# dynamically by /usr/sbin/update-exim4.conf
.ifndef MAIN_LOCAL_INTERFACES
MAIN_LOCAL_INTERFACES=127.0.0.1
.endif
.ifndef MAIN_PACKAGE_VERSION
MAIN_PACKAGE_VERSION=4.69-9
.endif
.ifndef MAIN_LOCAL_DOMAINS
MAIN_LOCAL_DOMAINS=@:localhost:zip
.endif
.ifndef MAIN_RELAY_TO_DOMAINS
MAIN_RELAY_TO_DOMAINS=empty
.endif
.ifndef ETC_MAILNAME
ETC_MAILNAME=zip
.endif
.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=mail_spool
.endif
.ifndef MAIN_RELAY_NETS
MAIN_RELAY_NETS=: 127.0.0.1 : ::::1
.endif
.ifndef DCreadhost
DCreadhost=empty
.endif
.ifndef DCsmarthost
DCsmarthost=empty
.endif
.ifndef DC_eximconfig_configtype
DC_eximconfig_configtype=local
.endif
.ifndef DCconfig_local
DCconfig_local=1
.endif
##############################################


domainlist local_domains = MAIN_LOCAL_DOMAINS

domainlist relay_to_domains = MAIN_RELAY_TO_DOMAINS

hostlist relay_from_hosts = MAIN_RELAY_NETS

.ifndef MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN
.ifndef MAIN_QUALIFY_DOMAIN
qualify_domain = ETC_MAILNAME
.else
qualify_domain = MAIN_QUALIFY_DOMAIN
.endif
.endif

.ifdef MAIN_LOCAL_INTERFACES
local_interfaces = MAIN_LOCAL_INTERFACES
.endif

.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=mail_spool
.endif

gecos_pattern = ^([^,:]*)
gecos_name = $1

.ifndef CHECK_RCPT_LOCAL_LOCALPARTS
CHECK_RCPT_LOCAL_LOCALPARTS = ^[.] : ^.*[@%!/|`#&?]
.endif

.ifndef CHECK_RCPT_REMOTE_LOCALPARTS
CHECK_RCPT_REMOTE_LOCALPARTS = ^[./|] : ^.*[@%!`#&?] : ^.*/\\.\\./
.endif

.ifndef MAIN_LOG_SELECTOR
MAIN_LOG_SELECTOR = +tls_peerdn
.endif

.ifndef MAIN_ACL_CHECK_MAIL
MAIN_ACL_CHECK_MAIL = acl_check_mail
.endif
acl_smtp_mail = MAIN_ACL_CHECK_MAIL

.ifndef MAIN_ACL_CHECK_RCPT
MAIN_ACL_CHECK_RCPT = acl_check_rcpt
.endif
acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT

.ifndef MAIN_ACL_CHECK_DATA
MAIN_ACL_CHECK_DATA = acl_check_data
.endif
acl_smtp_data = MAIN_ACL_CHECK_DATA

.ifdef MESSAGE_SIZE_LIMIT
message_size_limit = MESSAGE_SIZE_LIMIT
.endif

.ifdef MAIN_ALLOW_DOMAIN_LITERALS
allow_domain_literals
.endif

.ifndef DC_minimaldns
.ifndef MAIN_HOST_LOOKUP
MAIN_HOST_LOOKUP = *
.endif
host_lookup = MAIN_HOST_LOOKUP
.endif

.ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME
primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME
.endif

.ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
.endif

.ifndef MAIN_FORCE_SENDER
local_from_check = false
local_sender_retain = true
untrusted_set_sender = *
.endif

.ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER
MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d
.endif
ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER

.ifndef MAIN_TIMEOUT_FROZEN_AFTER
MAIN_TIMEOUT_FROZEN_AFTER = 7d
.endif
timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER

.ifndef MAIN_FREEZE_TELL
MAIN_FREEZE_TELL = postmaster
.endif
freeze_tell = MAIN_FREEZE_TELL

.ifndef SPOOLDIR
SPOOLDIR = /var/spool/exim4
.endif
spool_directory = SPOOLDIR

.ifndef MAIN_TRUSTED_USERS
MAIN_TRUSTED_USERS = uucp
.endif
trusted_users = MAIN_TRUSTED_USERS
.ifdef MAIN_TRUSTED_GROUPS
trusted_groups = MAIN_TRUSTED_GROUPS
.endif

.ifdef MAIN_TLS_ENABLE
.ifndef MAIN_TLS_ADVERTISE_HOSTS
MAIN_TLS_ADVERTISE_HOSTS = *
.endif
tls_advertise_hosts = MAIN_TLS_ADVERTISE_HOSTS

.ifdef MAIN_TLS_CERTKEY
tls_certificate = MAIN_TLS_CERTKEY
.else
.ifndef MAIN_TLS_CERTIFICATE
MAIN_TLS_CERTIFICATE = CONFDIR/exim.crt
.endif
tls_certificate = MAIN_TLS_CERTIFICATE

.ifndef MAIN_TLS_PRIVATEKEY
MAIN_TLS_PRIVATEKEY = CONFDIR/exim.key
.endif
tls_privatekey = MAIN_TLS_PRIVATEKEY
.endif

.ifndef MAIN_TLS_VERIFY_CERTIFICATES
MAIN_TLS_VERIFY_CERTIFICATES = ${if exists{/etc/ssl/certs/ca-certificates.crt}\
                                   {/etc/ssl/certs/ca-certificates.crt}\
			    {/dev/null}}
.endif
tls_verify_certificates = MAIN_TLS_VERIFY_CERTIFICATES

.ifdef MAIN_TLS_VERIFY_HOSTS
tls_verify_hosts = MAIN_TLS_VERIFY_HOSTS
.endif

.ifndef MAIN_TLS_TRY_VERIFY_HOSTS
MAIN_TLS_TRY_VERIFY_HOSTS = *
.endif
tls_try_verify_hosts = MAIN_TLS_TRY_VERIFY_HOSTS

.endif

.ifdef MAIN_LOG_SELECTOR
log_selector = MAIN_LOG_SELECTOR
.endif

begin acl

acl_local_deny_exceptions:
 accept
   hosts = ${if exists{CONFDIR/host_local_deny_exceptions}\
                {CONFDIR/host_local_deny_exceptions}\
                {}}
 accept
   senders = ${if exists{CONFDIR/sender_local_deny_exceptions}\
                  {CONFDIR/sender_local_deny_exceptions}\
                  {}}
 accept
   hosts = ${if exists{CONFDIR/local_host_whitelist}\
                {CONFDIR/local_host_whitelist}\
                {}}
 accept
   senders = ${if exists{CONFDIR/local_sender_whitelist}\
                  {CONFDIR/local_sender_whitelist}\
                  {}}

 .ifdef LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
 .include LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
 .endif

 .ifdef WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
 .include WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
 .endif

acl_check_mail:
 .ifdef CHECK_MAIL_HELO_ISSUED
 deny
   message = no HELO given before MAIL command
   condition = ${if def:sender_helo_name {no}{yes}}
 .endif

 accept

acl_check_rcpt:

 accept
   hosts = :

 .ifdef CHECK_RCPT_LOCAL_LOCALPARTS
 deny
   domains = +local_domains
   local_parts = CHECK_RCPT_LOCAL_LOCALPARTS
   message = restricted characters in address
 .endif



 .ifdef CHECK_RCPT_REMOTE_LOCALPARTS
 deny
   domains = !+local_domains
   local_parts = CHECK_RCPT_REMOTE_LOCALPARTS
   message = restricted characters in address
 .endif

 accept
   .ifndef CHECK_RCPT_POSTMASTER
   local_parts = postmaster
   .else
   local_parts = CHECK_RCPT_POSTMASTER
   .endif
   domains = +local_domains : +relay_to_domains

 .ifdef CHECK_RCPT_VERIFY_SENDER
 deny
   message = Sender verification failed
   !acl = acl_local_deny_exceptions
   !verify = sender
 .endif

 deny
   !acl = acl_local_deny_exceptions
   senders = ${if exists{CONFDIR/local_sender_callout}\
                        {CONFDIR/local_sender_callout}\
                  {}}
   !verify = sender/callout

 accept
   hosts = +relay_from_hosts
   control = submission/sender_retain

 accept
   authenticated = *
   control = submission/sender_retain

 require
   message = relay not permitted
   domains = +local_domains : +relay_to_domains

 require
   verify = recipient

 deny
   !acl = acl_local_deny_exceptions
   recipients = ${if exists{CONFDIR/local_rcpt_callout}\
                           {CONFDIR/local_rcpt_callout}\
                     {}}
   !verify = recipient/callout

 deny
   message = sender envelope address $sender_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
   !acl = acl_local_deny_exceptions
   senders = ${if exists{CONFDIR/local_sender_blacklist}\
                  {CONFDIR/local_sender_blacklist}\
                  {}}

 deny
   message = sender IP address $sender_host_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
   !acl = acl_local_deny_exceptions
   hosts = ${if exists{CONFDIR/local_host_blacklist}\
                {CONFDIR/local_host_blacklist}\
                {}}

 .ifdef CHECK_RCPT_REVERSE_DNS
 warn
   message = X-Host-Lookup-Failed: Reverse DNS lookup failed for $sender_host_address (${if eq{$host_lookup_failed}{1}{failed}{deferred}})
    condition = ${if and{{def:sender_host_address}{!def:sender_host_name}}\
                     {yes}{no}}
 .endif

 .ifdef CHECK_RCPT_SPF
 deny
   message = [sPF] $sender_host_address is not allowed to send mail from ${if def:sender_address_domain {$sender_address_domain}{$sender_helo_name}}.  \
             Please see http://www.openspf.org/Why?scope=${if def:sender_address_domain {mfrom}{helo}};identity=${if def:sender_address_domain {$sender_address}{$sender_helo_name}};ip=$sender_host_address
   log_message = SPF check failed.
   !acl = acl_local_deny_exceptions
   condition = ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" --helo \"$sender_helo_name\"}\
                    {no}{${if eq {$runrc}{1}{yes}{no}}}}

 defer
   message = Temporary DNS error while checking SPF record.  Try again later.
   condition = ${if eq {$runrc}{5}{yes}{no}}

 warn
   message = Received-SPF: ${if eq {$runrc}{0}{pass}{${if eq {$runrc}{2}{softfail}\
                                {${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}{${if eq {$runrc}{6}{none}{error}}}}}}}}}}
   condition = ${if <={$runrc}{6}{yes}{no}}

 warn
   log_message = Unexpected error in SPF check.
   condition = ${if >{$runrc}{6}{yes}{no}}

 warn
   message = X-SPF-Guess: ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" \ --helo \"$sender_helo_name\" --guess true}\
                               {pass}{${if eq {$runrc}{2}{softfail}{${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}\
                               {${if eq {$runrc}{6}{none}{error}}}}}}}}}}
   condition = ${if <={$runrc}{6}{yes}{no}}

 defer
   message = Temporary DNS error while checking SPF record.  Try again later.
   condition = ${if eq {$runrc}{5}{yes}{no}}
 .endif

 .ifdef CHECK_RCPT_IP_DNSBLS
 warn
   message = X-Warning: $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
   log_message = $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
   dnslists = CHECK_RCPT_IP_DNSBLS
 .endif

 .ifdef CHECK_RCPT_DOMAIN_DNSBLS
 warn
   message = X-Warning: $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
   log_message = $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
   !senders = ${if exists{CONFDIR/local_domain_dnsbl_whitelist}\
                   {CONFDIR/local_domain_dnsbl_whitelist}\
                   {}}
   dnslists = CHECK_RCPT_DOMAIN_DNSBLS
 .endif

 .ifdef CHECK_RCPT_LOCAL_ACL_FILE
 .include CHECK_RCPT_LOCAL_ACL_FILE
 .endif

 accept
   domains = +relay_to_domains
   endpass
   verify = recipient

 accept

acl_check_data:

 .ifdef CHECK_DATA_VERIFY_HEADER_SYNTAX
 deny
   message = Message headers fail syntax check
   !acl = acl_local_deny_exceptions
   !verify = header_syntax
 .endif

 .ifdef CHECK_DATA_VERIFY_HEADER_SENDER
 deny
   message = No verifiable sender address in message headers
   !acl = acl_local_deny_exceptions
   !verify = header_sender
 .endif

 .ifdef CHECK_DATA_LOCAL_ACL_FILE
 .include CHECK_DATA_LOCAL_ACL_FILE
 .endif

 accept

begin routers

.ifdef MAIN_ALLOW_DOMAIN_LITERALS
domain_literal:
 debug_print = "R: domain_literal for $local_part@$domain"
 driver = ipliteral
 domains = ! +local_domains
 transport = remote_smtp
.endif

hubbed_hosts:
 debug_print = "R: hubbed_hosts for $domain"
 driver = manualroute
 domains = "${if exists{CONFDIR/hubbed_hosts}\
                  {partial-lsearch;CONFDIR/hubbed_hosts}\
             fail}"
 same_domain_copy_routing = yes
 route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}}
 transport = remote_smtp

.ifdef DCconfig_internet

dnslookup_relay_to_domains:
 debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain"
 driver = dnslookup
 domains = ! +local_domains : +relay_to_domains
 transport = remote_smtp
 same_domain_copy_routing = yes
 no_more

dnslookup:
 debug_print = "R: dnslookup for $local_part@$domain"
 driver = dnslookup
 domains = ! +local_domains
 transport = remote_smtp
 same_domain_copy_routing = yes
 ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
                       172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\
		255.255.255.255
 no_more

.endif

.ifdef DCconfig_local
nonlocal:
 debug_print = "R: nonlocal for $local_part@$domain"
 driver = redirect
 domains = ! +local_domains
 allow_fail
 data = :fail: Mailing to remote domains not supported
 no_more

.endif

.ifdef DCconfig_smarthost DCconfig_satellite

smarthost:
 debug_print = "R: smarthost for $local_part@$domain"
 driver = manualroute
 domains = ! +local_domains
 transport = remote_smtp_smarthost
 route_list = * DCsmarthost byname
 host_find_failed = defer
 same_domain_copy_routing = yes
 no_more

.endif

COND_LOCAL_SUBMITTER = "\
              ${if match_ip{$sender_host_address}{:@[]}\
                   {1}{0}\
	}"

real_local:
 debug_print = "R: real_local for $local_part@$domain"
 driver = accept
 domains = +local_domains
 condition = COND_LOCAL_SUBMITTER
 local_part_prefix = real-
 check_local_user
 transport = LOCAL_DELIVERY

system_aliases:
 debug_print = "R: system_aliases for $local_part@$domain"
 driver = redirect
 domains = +local_domains
 allow_fail
 allow_defer
 data = ${lookup{$local_part}lsearch{/etc/aliases}}
 .ifdef SYSTEM_ALIASES_USER
 user = SYSTEM_ALIASES_USER
 .endif
 .ifdef SYSTEM_ALIASES_GROUP
 group = SYSTEM_ALIASES_GROUP
 .endif
 .ifdef SYSTEM_ALIASES_FILE_TRANSPORT
 file_transport = SYSTEM_ALIASES_FILE_TRANSPORT
 .endif
 .ifdef SYSTEM_ALIASES_PIPE_TRANSPORT
 pipe_transport = SYSTEM_ALIASES_PIPE_TRANSPORT
 .endif
 .ifdef SYSTEM_ALIASES_DIRECTORY_TRANSPORT
 directory_transport = SYSTEM_ALIASES_DIRECTORY_TRANSPORT
 .endif

.ifdef DCconfig_satellite
hub_user:
 debug_print = "R: hub_user for $local_part@$domain"
 driver = redirect
 domains = +local_domains
 data = ${local_part}@DCreadhost
 check_local_user

hub_user_smarthost:
 debug_print = "R: hub_user_smarthost for $local_part@$domain"
 driver = manualroute
 domains = DCreadhost
 transport = remote_smtp_smarthost
 route_list = * DCsmarthost byname
 host_find_failed = defer
 same_domain_copy_routing = yes
 check_local_user
.endif

userforward:
 debug_print = "R: userforward for $local_part@$domain"
 driver = redirect
 domains = +local_domains
 check_local_user
 file = $home/.forward
 require_files = $local_part:$home/.forward
 no_verify
 no_expn
 check_ancestor
 allow_filter
 forbid_smtp_code = true
 directory_transport = address_directory
 file_transport = address_file
 pipe_transport = address_pipe
 reply_transport = address_reply
 skip_syntax_errors
 syntax_errors_to = real-$local_part@$domain
 syntax_errors_text = \
   This is an automatically generated message. An error has\n\
   been found in your .forward file. Details of the error are\n\
   reported below. While this error persists, you will receive\n\
   a copy of this message for every message that is addressed\n\
   to you. If your .forward file is a filter file, or if it is\n\
   a non-filter file containing no valid forwarding addresses,\n\
   a copy of each incoming message will be put in your normal\n\
   mailbox. If a non-filter file contains at least one valid\n\
   forwarding address, forwarding to the valid addresses will\n\
   happen, and those will be the only deliveries that occur.

procmail:
 debug_print = "R: procmail for $local_part@$domain"
 driver = accept
 domains = +local_domains
 check_local_user
 transport = procmail_pipe
 require_files = ${local_part}:\
                 ${if exists{/etc/procmailrc}\
                   {/etc/procmailrc}{${home}/.procmailrc}}:\
                 +/usr/bin/procmail
 no_verify
 no_expn

maildrop:
 debug_print = "R: maildrop for $local_part@$domain"
 driver = accept
 domains = +local_domains
 check_local_user
 transport = maildrop_pipe
 require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop
 no_verify
 no_expn

.ifndef FIRST_USER_ACCOUNT_UID
FIRST_USER_ACCOUNT_UID = 0
.endif

.ifndef DEFAULT_SYSTEM_ACCOUNT_ALIAS
DEFAULT_SYSTEM_ACCOUNT_ALIAS = :fail: no mail to system accounts
.endif

COND_SYSTEM_USER_AND_REMOTE_SUBMITTER = "\
              ${if and{{! match_ip{$sender_host_address}{:@[]}}\
                       {<{$local_user_uid}{FIRST_USER_ACCOUNT_UID}}}\
                   {1}{0}\
	}"

lowuid_aliases:
 debug_print = "R: lowuid_aliases for $local_part@$domain (UID $local_user_uid)"
 check_local_user
 driver = redirect
 allow_fail
 domains = +local_domains
 condition = COND_SYSTEM_USER_AND_REMOTE_SUBMITTER
 data = ${if exists{/etc/exim4/lowuid-aliases}\
             {${lookup{$local_part}lsearch{/etc/exim4/lowuid-aliases}\
             {$value}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}

local_user:
 debug_print = "R: local_user for $local_part@$domain"
 driver = accept
 domains = +local_domains
 check_local_user
 local_parts = ! root
 transport = LOCAL_DELIVERY
 cannot_route_message = Unknown user

mail4root:
 debug_print = "R: mail4root for $local_part@$domain"
 driver = redirect
 domains = +local_domains
 data = /var/mail/mail
 file_transport = address_file
 local_parts = root
 user = mail
 group = mail

begin transports

.ifdef HIDE_MAILNAME
REMOTE_SMTP_HEADERS_REWRITE=*@+local_domains $1@DCreadhost frs : *@ETC_MAILNAME $1@DCreadhost frs
REMOTE_SMTP_RETURN_PATH=${if match_domain{$sender_address_domain}{+local_domains}{${sender_address_local_part}@DCreadhost}{${if match_domain{$sender_address_domain}{ETC_MAILNAME}{${sender_address_local_part}@DCreadhost}fail}}}
.endif

.ifdef REMOTE_SMTP_HELO_FROM_DNS
REMOTE_SMTP_HELO_DATA=${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}}
.endif

address_file:
 debug_print = "T: address_file for $local_part@$domain"
 driver = appendfile
 delivery_date_add
 envelope_to_add
 return_path_add

address_pipe:
 debug_print = "T: address_pipe for $local_part@$domain"
 driver = pipe
 return_fail_output

address_reply:
 debug_print = "T: autoreply for $local_part@$domain"
 driver = autoreply

mail_spool:
 debug_print = "T: appendfile for $local_part@$domain"
 driver = appendfile
 file = /var/mail/$local_part
 delivery_date_add
 envelope_to_add
 return_path_add
 group = mail
 mode = 0660
 mode_fail_narrower = false

maildir_home:
 debug_print = "T: maildir_home for $local_part@$domain"
 driver = appendfile
 .ifdef MAILDIR_HOME_MAILDIR_LOCATION
 directory = MAILDIR_HOME_MAILDIR_LOCATION
 .else
 directory = $home/Maildir
 .endif
 .ifdef MAILDIR_HOME_CREATE_DIRECTORY
 create_directory
 .endif
 .ifdef MAILDIR_HOME_CREATE_FILE
 create_file = MAILDIR_HOME_CREATE_FILE
 .endif
 delivery_date_add
 envelope_to_add
 return_path_add
 maildir_format
 .ifdef MAILDIR_HOME_DIRECTORY_MODE
 directory_mode = MAILDIR_HOME_DIRECTORY_MODE
 .else
 directory_mode = 0700
 .endif
 .ifdef MAILDIR_HOME_MODE
 mode = MAILDIR_HOME_MODE
 .else
 mode = 0600
 .endif
 mode_fail_narrower = false

maildrop_pipe:
 debug_print = "T: maildrop_pipe for $local_part@$domain"
 driver = pipe
 path = "/bin:/usr/bin:/usr/local/bin"
 command = "/usr/bin/maildrop"
 return_path_add
 delivery_date_add
 envelope_to_add

procmail_pipe:
 debug_print = "T: procmail_pipe for $local_part@$domain"
 driver = pipe
 path = "/bin:/usr/bin:/usr/local/bin"
 command = "/usr/bin/procmail"
 return_path_add
 delivery_date_add
 envelope_to_add

remote_smtp:
 debug_print = "T: remote_smtp for $local_part@$domain"
 driver = smtp
.ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
 hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
 headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
 return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_FROM_DNS
 helo_data=REMOTE_SMTP_HELO_DATA
.endif

remote_smtp_smarthost:
 debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
 driver = smtp
 hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
       {\
       ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
       }\
       {} \
     }
.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
 hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
 headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
 return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_FROM_DNS
 helo_data=REMOTE_SMTP_HELO_DATA
.endif

address_directory:
 debug_print = "T: address_directory for $local_part@$domain"
 driver = appendfile
 delivery_date_add
 envelope_to_add
 return_path_add
 check_string = ""
 escape_string = ""
 maildir_format

begin retry

*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h

begin rewrite

.ifndef NO_EAA_REWRITE_REWRITE
*@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses}\
                  {$value}fail}" Ffrs
*@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses}\
                  {$value}fail}" Ffrs
.endif

begin authenticators

cram_md5:
 driver = cram_md5
 public_name = CRAM-MD5
 client_name = ${extract{1}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
 client_secret = ${extract{2}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}

PASSWDLINE=${sg{\
               ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}\
        }\
        {\\N[\\^]\\N}\
        {^^}\
    }

plain:
 driver = plaintext
 public_name = PLAIN
.ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
 client_send = "<; ${if !eq{$tls_cipher}{}\
                   {^${extract{1}{:}{PASSWDLINE}}\
	     ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}\
	   }fail}"
.else
 client_send = "<; ^${extract{1}{:}{PASSWDLINE}}\
	    ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.endif

login:
 driver = plaintext
 public_name = LOGIN
.ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
 client_send = "<; ${if and{\
                         {!eq{$tls_cipher}{}}\
                         {!eq{PASSWDLINE}{}}\
                        }\
                     {}fail}\
                ; ${extract{1}{::}{PASSWDLINE}}\
	 ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.else
 client_send = "<; ${if !eq{PASSWDLINE}{}\
                     {}fail}\
                ; ${extract{1}{::}{PASSWDLINE}}\
	 ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.endif

 

šeit:

.ifdef DCconfig_local
nonlocal:
 debug_print = "R: nonlocal for $local_part@$domain"
 driver = redirect
 domains = ! +local_domains
 allow_fail
 data = :fail: Mailing to remote domains not supported
 no_more

.endif

Edited by gunars
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
 Share
Go to topic listing
×
×
  • Create New...