Jump to content
php.lv forumi

gunars

Reģistrētie lietotāji
  • Posts

    22
  • Joined

  • Last visited

gunars's Achievements

Newbie

Newbie (1/14)

  1. Ja cilvēks domā ar prātu un vēlas hostēt pieklājīgu lapu noteikti izdevīgāk ir nopirkt serveri. Ja ir interese paspēlēties, hostēt vienu mēnesi vai patriek naudu tad to var izmantot. Latvija ir unikāla ar savām paranormālajām serveru īrēm.
  2. ######### # WARNING WARNING WARNING # WARNING WARNING WARNING # WARNING WARNING WARNING # WARNING WARNING WARNING # WARNING WARNING WARNING # This file is generated dynamically from the files in # the conf.d/ directory, or from exim4.conf.template respectively. # Additional information is read from update-exim4.conf.conf # This version of the file was created from the directory /etc/exim4 # Any changes you make here will be lost. # See /usr/share/doc/exim4-base/README.Debian.gz and update-exim4.conf(8) # for instructions of customization. # WARNING WARNING WARNING # WARNING WARNING WARNING # WARNING WARNING WARNING # WARNING WARNING WARNING # WARNING WARNING WARNING ######### exim_path = /usr/sbin/exim4 .ifndef CONFDIR CONFDIR = /etc/exim4 .endif UPEX4CmacrosUPEX4C = 1 ############################################## # the following macro definitions were created # dynamically by /usr/sbin/update-exim4.conf .ifndef MAIN_LOCAL_INTERFACES MAIN_LOCAL_INTERFACES=127.0.0.1 .endif .ifndef MAIN_PACKAGE_VERSION MAIN_PACKAGE_VERSION=4.69-9 .endif .ifndef MAIN_LOCAL_DOMAINS MAIN_LOCAL_DOMAINS=@:localhost:zip .endif .ifndef MAIN_RELAY_TO_DOMAINS MAIN_RELAY_TO_DOMAINS=empty .endif .ifndef ETC_MAILNAME ETC_MAILNAME=zip .endif .ifndef LOCAL_DELIVERY LOCAL_DELIVERY=mail_spool .endif .ifndef MAIN_RELAY_NETS MAIN_RELAY_NETS=: 127.0.0.1 : ::::1 .endif .ifndef DCreadhost DCreadhost=empty .endif .ifndef DCsmarthost DCsmarthost=empty .endif .ifndef DC_eximconfig_configtype DC_eximconfig_configtype=local .endif .ifndef DCconfig_local DCconfig_local=1 .endif ############################################## domainlist local_domains = MAIN_LOCAL_DOMAINS domainlist relay_to_domains = MAIN_RELAY_TO_DOMAINS hostlist relay_from_hosts = MAIN_RELAY_NETS .ifndef MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN .ifndef MAIN_QUALIFY_DOMAIN qualify_domain = ETC_MAILNAME .else qualify_domain = MAIN_QUALIFY_DOMAIN .endif .endif .ifdef MAIN_LOCAL_INTERFACES local_interfaces = MAIN_LOCAL_INTERFACES .endif .ifndef LOCAL_DELIVERY LOCAL_DELIVERY=mail_spool .endif gecos_pattern = ^([^,:]*) gecos_name = $1 .ifndef CHECK_RCPT_LOCAL_LOCALPARTS CHECK_RCPT_LOCAL_LOCALPARTS = ^[.] : ^.*[@%!/|`#&?] .endif .ifndef CHECK_RCPT_REMOTE_LOCALPARTS CHECK_RCPT_REMOTE_LOCALPARTS = ^[./|] : ^.*[@%!`#&?] : ^.*/\\.\\./ .endif .ifndef MAIN_LOG_SELECTOR MAIN_LOG_SELECTOR = +tls_peerdn .endif .ifndef MAIN_ACL_CHECK_MAIL MAIN_ACL_CHECK_MAIL = acl_check_mail .endif acl_smtp_mail = MAIN_ACL_CHECK_MAIL .ifndef MAIN_ACL_CHECK_RCPT MAIN_ACL_CHECK_RCPT = acl_check_rcpt .endif acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT .ifndef MAIN_ACL_CHECK_DATA MAIN_ACL_CHECK_DATA = acl_check_data .endif acl_smtp_data = MAIN_ACL_CHECK_DATA .ifdef MESSAGE_SIZE_LIMIT message_size_limit = MESSAGE_SIZE_LIMIT .endif .ifdef MAIN_ALLOW_DOMAIN_LITERALS allow_domain_literals .endif .ifndef DC_minimaldns .ifndef MAIN_HOST_LOOKUP MAIN_HOST_LOOKUP = * .endif host_lookup = MAIN_HOST_LOOKUP .endif .ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME .endif .ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS .endif .ifndef MAIN_FORCE_SENDER local_from_check = false local_sender_retain = true untrusted_set_sender = * .endif .ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d .endif ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER .ifndef MAIN_TIMEOUT_FROZEN_AFTER MAIN_TIMEOUT_FROZEN_AFTER = 7d .endif timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER .ifndef MAIN_FREEZE_TELL MAIN_FREEZE_TELL = postmaster .endif freeze_tell = MAIN_FREEZE_TELL .ifndef SPOOLDIR SPOOLDIR = /var/spool/exim4 .endif spool_directory = SPOOLDIR .ifndef MAIN_TRUSTED_USERS MAIN_TRUSTED_USERS = uucp .endif trusted_users = MAIN_TRUSTED_USERS .ifdef MAIN_TRUSTED_GROUPS trusted_groups = MAIN_TRUSTED_GROUPS .endif .ifdef MAIN_TLS_ENABLE .ifndef MAIN_TLS_ADVERTISE_HOSTS MAIN_TLS_ADVERTISE_HOSTS = * .endif tls_advertise_hosts = MAIN_TLS_ADVERTISE_HOSTS .ifdef MAIN_TLS_CERTKEY tls_certificate = MAIN_TLS_CERTKEY .else .ifndef MAIN_TLS_CERTIFICATE MAIN_TLS_CERTIFICATE = CONFDIR/exim.crt .endif tls_certificate = MAIN_TLS_CERTIFICATE .ifndef MAIN_TLS_PRIVATEKEY MAIN_TLS_PRIVATEKEY = CONFDIR/exim.key .endif tls_privatekey = MAIN_TLS_PRIVATEKEY .endif .ifndef MAIN_TLS_VERIFY_CERTIFICATES MAIN_TLS_VERIFY_CERTIFICATES = ${if exists{/etc/ssl/certs/ca-certificates.crt}\ {/etc/ssl/certs/ca-certificates.crt}\ {/dev/null}} .endif tls_verify_certificates = MAIN_TLS_VERIFY_CERTIFICATES .ifdef MAIN_TLS_VERIFY_HOSTS tls_verify_hosts = MAIN_TLS_VERIFY_HOSTS .endif .ifndef MAIN_TLS_TRY_VERIFY_HOSTS MAIN_TLS_TRY_VERIFY_HOSTS = * .endif tls_try_verify_hosts = MAIN_TLS_TRY_VERIFY_HOSTS .endif .ifdef MAIN_LOG_SELECTOR log_selector = MAIN_LOG_SELECTOR .endif begin acl acl_local_deny_exceptions: accept hosts = ${if exists{CONFDIR/host_local_deny_exceptions}\ {CONFDIR/host_local_deny_exceptions}\ {}} accept senders = ${if exists{CONFDIR/sender_local_deny_exceptions}\ {CONFDIR/sender_local_deny_exceptions}\ {}} accept hosts = ${if exists{CONFDIR/local_host_whitelist}\ {CONFDIR/local_host_whitelist}\ {}} accept senders = ${if exists{CONFDIR/local_sender_whitelist}\ {CONFDIR/local_sender_whitelist}\ {}} .ifdef LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE .include LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE .endif .ifdef WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE .include WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE .endif acl_check_mail: .ifdef CHECK_MAIL_HELO_ISSUED deny message = no HELO given before MAIL command condition = ${if def:sender_helo_name {no}{yes}} .endif accept acl_check_rcpt: accept hosts = : .ifdef CHECK_RCPT_LOCAL_LOCALPARTS deny domains = +local_domains local_parts = CHECK_RCPT_LOCAL_LOCALPARTS message = restricted characters in address .endif .ifdef CHECK_RCPT_REMOTE_LOCALPARTS deny domains = !+local_domains local_parts = CHECK_RCPT_REMOTE_LOCALPARTS message = restricted characters in address .endif accept .ifndef CHECK_RCPT_POSTMASTER local_parts = postmaster .else local_parts = CHECK_RCPT_POSTMASTER .endif domains = +local_domains : +relay_to_domains .ifdef CHECK_RCPT_VERIFY_SENDER deny message = Sender verification failed !acl = acl_local_deny_exceptions !verify = sender .endif deny !acl = acl_local_deny_exceptions senders = ${if exists{CONFDIR/local_sender_callout}\ {CONFDIR/local_sender_callout}\ {}} !verify = sender/callout accept hosts = +relay_from_hosts control = submission/sender_retain accept authenticated = * control = submission/sender_retain require message = relay not permitted domains = +local_domains : +relay_to_domains require verify = recipient deny !acl = acl_local_deny_exceptions recipients = ${if exists{CONFDIR/local_rcpt_callout}\ {CONFDIR/local_rcpt_callout}\ {}} !verify = recipient/callout deny message = sender envelope address $sender_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster !acl = acl_local_deny_exceptions senders = ${if exists{CONFDIR/local_sender_blacklist}\ {CONFDIR/local_sender_blacklist}\ {}} deny message = sender IP address $sender_host_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster !acl = acl_local_deny_exceptions hosts = ${if exists{CONFDIR/local_host_blacklist}\ {CONFDIR/local_host_blacklist}\ {}} .ifdef CHECK_RCPT_REVERSE_DNS warn message = X-Host-Lookup-Failed: Reverse DNS lookup failed for $sender_host_address (${if eq{$host_lookup_failed}{1}{failed}{deferred}}) condition = ${if and{{def:sender_host_address}{!def:sender_host_name}}\ {yes}{no}} .endif .ifdef CHECK_RCPT_SPF deny message = [sPF] $sender_host_address is not allowed to send mail from ${if def:sender_address_domain {$sender_address_domain}{$sender_helo_name}}. \ Please see http://www.openspf.org/Why?scope=${if def:sender_address_domain {mfrom}{helo}};identity=${if def:sender_address_domain {$sender_address}{$sender_helo_name}};ip=$sender_host_address log_message = SPF check failed. !acl = acl_local_deny_exceptions condition = ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" --helo \"$sender_helo_name\"}\ {no}{${if eq {$runrc}{1}{yes}{no}}}} defer message = Temporary DNS error while checking SPF record. Try again later. condition = ${if eq {$runrc}{5}{yes}{no}} warn message = Received-SPF: ${if eq {$runrc}{0}{pass}{${if eq {$runrc}{2}{softfail}\ {${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}{${if eq {$runrc}{6}{none}{error}}}}}}}}}} condition = ${if <={$runrc}{6}{yes}{no}} warn log_message = Unexpected error in SPF check. condition = ${if >{$runrc}{6}{yes}{no}} warn message = X-SPF-Guess: ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" \ --helo \"$sender_helo_name\" --guess true}\ {pass}{${if eq {$runrc}{2}{softfail}{${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}\ {${if eq {$runrc}{6}{none}{error}}}}}}}}}} condition = ${if <={$runrc}{6}{yes}{no}} defer message = Temporary DNS error while checking SPF record. Try again later. condition = ${if eq {$runrc}{5}{yes}{no}} .endif .ifdef CHECK_RCPT_IP_DNSBLS warn message = X-Warning: $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text) log_message = $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text) dnslists = CHECK_RCPT_IP_DNSBLS .endif .ifdef CHECK_RCPT_DOMAIN_DNSBLS warn message = X-Warning: $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text) log_message = $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text) !senders = ${if exists{CONFDIR/local_domain_dnsbl_whitelist}\ {CONFDIR/local_domain_dnsbl_whitelist}\ {}} dnslists = CHECK_RCPT_DOMAIN_DNSBLS .endif .ifdef CHECK_RCPT_LOCAL_ACL_FILE .include CHECK_RCPT_LOCAL_ACL_FILE .endif accept domains = +relay_to_domains endpass verify = recipient accept acl_check_data: .ifdef CHECK_DATA_VERIFY_HEADER_SYNTAX deny message = Message headers fail syntax check !acl = acl_local_deny_exceptions !verify = header_syntax .endif .ifdef CHECK_DATA_VERIFY_HEADER_SENDER deny message = No verifiable sender address in message headers !acl = acl_local_deny_exceptions !verify = header_sender .endif .ifdef CHECK_DATA_LOCAL_ACL_FILE .include CHECK_DATA_LOCAL_ACL_FILE .endif accept begin routers .ifdef MAIN_ALLOW_DOMAIN_LITERALS domain_literal: debug_print = "R: domain_literal for $local_part@$domain" driver = ipliteral domains = ! +local_domains transport = remote_smtp .endif hubbed_hosts: debug_print = "R: hubbed_hosts for $domain" driver = manualroute domains = "${if exists{CONFDIR/hubbed_hosts}\ {partial-lsearch;CONFDIR/hubbed_hosts}\ fail}" same_domain_copy_routing = yes route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}} transport = remote_smtp .ifdef DCconfig_internet dnslookup_relay_to_domains: debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain" driver = dnslookup domains = ! +local_domains : +relay_to_domains transport = remote_smtp same_domain_copy_routing = yes no_more dnslookup: debug_print = "R: dnslookup for $local_part@$domain" driver = dnslookup domains = ! +local_domains transport = remote_smtp same_domain_copy_routing = yes ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\ 172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\ 255.255.255.255 no_more .endif .ifdef DCconfig_local nonlocal: debug_print = "R: nonlocal for $local_part@$domain" driver = redirect domains = ! +local_domains allow_fail data = :fail: Mailing to remote domains not supported no_more .endif .ifdef DCconfig_smarthost DCconfig_satellite smarthost: debug_print = "R: smarthost for $local_part@$domain" driver = manualroute domains = ! +local_domains transport = remote_smtp_smarthost route_list = * DCsmarthost byname host_find_failed = defer same_domain_copy_routing = yes no_more .endif COND_LOCAL_SUBMITTER = "\ ${if match_ip{$sender_host_address}{:@[]}\ {1}{0}\ }" real_local: debug_print = "R: real_local for $local_part@$domain" driver = accept domains = +local_domains condition = COND_LOCAL_SUBMITTER local_part_prefix = real- check_local_user transport = LOCAL_DELIVERY system_aliases: debug_print = "R: system_aliases for $local_part@$domain" driver = redirect domains = +local_domains allow_fail allow_defer data = ${lookup{$local_part}lsearch{/etc/aliases}} .ifdef SYSTEM_ALIASES_USER user = SYSTEM_ALIASES_USER .endif .ifdef SYSTEM_ALIASES_GROUP group = SYSTEM_ALIASES_GROUP .endif .ifdef SYSTEM_ALIASES_FILE_TRANSPORT file_transport = SYSTEM_ALIASES_FILE_TRANSPORT .endif .ifdef SYSTEM_ALIASES_PIPE_TRANSPORT pipe_transport = SYSTEM_ALIASES_PIPE_TRANSPORT .endif .ifdef SYSTEM_ALIASES_DIRECTORY_TRANSPORT directory_transport = SYSTEM_ALIASES_DIRECTORY_TRANSPORT .endif .ifdef DCconfig_satellite hub_user: debug_print = "R: hub_user for $local_part@$domain" driver = redirect domains = +local_domains data = ${local_part}@DCreadhost check_local_user hub_user_smarthost: debug_print = "R: hub_user_smarthost for $local_part@$domain" driver = manualroute domains = DCreadhost transport = remote_smtp_smarthost route_list = * DCsmarthost byname host_find_failed = defer same_domain_copy_routing = yes check_local_user .endif userforward: debug_print = "R: userforward for $local_part@$domain" driver = redirect domains = +local_domains check_local_user file = $home/.forward require_files = $local_part:$home/.forward no_verify no_expn check_ancestor allow_filter forbid_smtp_code = true directory_transport = address_directory file_transport = address_file pipe_transport = address_pipe reply_transport = address_reply skip_syntax_errors syntax_errors_to = real-$local_part@$domain syntax_errors_text = \ This is an automatically generated message. An error has\n\ been found in your .forward file. Details of the error are\n\ reported below. While this error persists, you will receive\n\ a copy of this message for every message that is addressed\n\ to you. If your .forward file is a filter file, or if it is\n\ a non-filter file containing no valid forwarding addresses,\n\ a copy of each incoming message will be put in your normal\n\ mailbox. If a non-filter file contains at least one valid\n\ forwarding address, forwarding to the valid addresses will\n\ happen, and those will be the only deliveries that occur. procmail: debug_print = "R: procmail for $local_part@$domain" driver = accept domains = +local_domains check_local_user transport = procmail_pipe require_files = ${local_part}:\ ${if exists{/etc/procmailrc}\ {/etc/procmailrc}{${home}/.procmailrc}}:\ +/usr/bin/procmail no_verify no_expn maildrop: debug_print = "R: maildrop for $local_part@$domain" driver = accept domains = +local_domains check_local_user transport = maildrop_pipe require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop no_verify no_expn .ifndef FIRST_USER_ACCOUNT_UID FIRST_USER_ACCOUNT_UID = 0 .endif .ifndef DEFAULT_SYSTEM_ACCOUNT_ALIAS DEFAULT_SYSTEM_ACCOUNT_ALIAS = :fail: no mail to system accounts .endif COND_SYSTEM_USER_AND_REMOTE_SUBMITTER = "\ ${if and{{! match_ip{$sender_host_address}{:@[]}}\ {<{$local_user_uid}{FIRST_USER_ACCOUNT_UID}}}\ {1}{0}\ }" lowuid_aliases: debug_print = "R: lowuid_aliases for $local_part@$domain (UID $local_user_uid)" check_local_user driver = redirect allow_fail domains = +local_domains condition = COND_SYSTEM_USER_AND_REMOTE_SUBMITTER data = ${if exists{/etc/exim4/lowuid-aliases}\ {${lookup{$local_part}lsearch{/etc/exim4/lowuid-aliases}\ {$value}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}} local_user: debug_print = "R: local_user for $local_part@$domain" driver = accept domains = +local_domains check_local_user local_parts = ! root transport = LOCAL_DELIVERY cannot_route_message = Unknown user mail4root: debug_print = "R: mail4root for $local_part@$domain" driver = redirect domains = +local_domains data = /var/mail/mail file_transport = address_file local_parts = root user = mail group = mail begin transports .ifdef HIDE_MAILNAME REMOTE_SMTP_HEADERS_REWRITE=*@+local_domains $1@DCreadhost frs : *@ETC_MAILNAME $1@DCreadhost frs REMOTE_SMTP_RETURN_PATH=${if match_domain{$sender_address_domain}{+local_domains}{${sender_address_local_part}@DCreadhost}{${if match_domain{$sender_address_domain}{ETC_MAILNAME}{${sender_address_local_part}@DCreadhost}fail}}} .endif .ifdef REMOTE_SMTP_HELO_FROM_DNS REMOTE_SMTP_HELO_DATA=${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}} .endif address_file: debug_print = "T: address_file for $local_part@$domain" driver = appendfile delivery_date_add envelope_to_add return_path_add address_pipe: debug_print = "T: address_pipe for $local_part@$domain" driver = pipe return_fail_output address_reply: debug_print = "T: autoreply for $local_part@$domain" driver = autoreply mail_spool: debug_print = "T: appendfile for $local_part@$domain" driver = appendfile file = /var/mail/$local_part delivery_date_add envelope_to_add return_path_add group = mail mode = 0660 mode_fail_narrower = false maildir_home: debug_print = "T: maildir_home for $local_part@$domain" driver = appendfile .ifdef MAILDIR_HOME_MAILDIR_LOCATION directory = MAILDIR_HOME_MAILDIR_LOCATION .else directory = $home/Maildir .endif .ifdef MAILDIR_HOME_CREATE_DIRECTORY create_directory .endif .ifdef MAILDIR_HOME_CREATE_FILE create_file = MAILDIR_HOME_CREATE_FILE .endif delivery_date_add envelope_to_add return_path_add maildir_format .ifdef MAILDIR_HOME_DIRECTORY_MODE directory_mode = MAILDIR_HOME_DIRECTORY_MODE .else directory_mode = 0700 .endif .ifdef MAILDIR_HOME_MODE mode = MAILDIR_HOME_MODE .else mode = 0600 .endif mode_fail_narrower = false maildrop_pipe: debug_print = "T: maildrop_pipe for $local_part@$domain" driver = pipe path = "/bin:/usr/bin:/usr/local/bin" command = "/usr/bin/maildrop" return_path_add delivery_date_add envelope_to_add procmail_pipe: debug_print = "T: procmail_pipe for $local_part@$domain" driver = pipe path = "/bin:/usr/bin:/usr/local/bin" command = "/usr/bin/procmail" return_path_add delivery_date_add envelope_to_add remote_smtp: debug_print = "T: remote_smtp for $local_part@$domain" driver = smtp .ifdef REMOTE_SMTP_HOSTS_AVOID_TLS hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS .endif .ifdef REMOTE_SMTP_HEADERS_REWRITE headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE .endif .ifdef REMOTE_SMTP_RETURN_PATH return_path = REMOTE_SMTP_RETURN_PATH .endif .ifdef REMOTE_SMTP_HELO_FROM_DNS helo_data=REMOTE_SMTP_HELO_DATA .endif remote_smtp_smarthost: debug_print = "T: remote_smtp_smarthost for $local_part@$domain" driver = smtp hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \ {\ ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\ }\ {} \ } .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS .endif .ifdef REMOTE_SMTP_HEADERS_REWRITE headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE .endif .ifdef REMOTE_SMTP_RETURN_PATH return_path = REMOTE_SMTP_RETURN_PATH .endif .ifdef REMOTE_SMTP_HELO_FROM_DNS helo_data=REMOTE_SMTP_HELO_DATA .endif address_directory: debug_print = "T: address_directory for $local_part@$domain" driver = appendfile delivery_date_add envelope_to_add return_path_add check_string = "" escape_string = "" maildir_format begin retry * * F,2h,15m; G,16h,1h,1.5; F,4d,6h begin rewrite .ifndef NO_EAA_REWRITE_REWRITE *@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses}\ {$value}fail}" Ffrs *@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses}\ {$value}fail}" Ffrs .endif begin authenticators cram_md5: driver = cram_md5 public_name = CRAM-MD5 client_name = ${extract{1}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}} client_secret = ${extract{2}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}} PASSWDLINE=${sg{\ ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}\ }\ {\\N[\\^]\\N}\ {^^}\ } plain: driver = plaintext public_name = PLAIN .ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS client_send = "<; ${if !eq{$tls_cipher}{}\ {^${extract{1}{:}{PASSWDLINE}}\ ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}\ }fail}" .else client_send = "<; ^${extract{1}{:}{PASSWDLINE}}\ ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}" .endif login: driver = plaintext public_name = LOGIN .ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS client_send = "<; ${if and{\ {!eq{$tls_cipher}{}}\ {!eq{PASSWDLINE}{}}\ }\ {}fail}\ ; ${extract{1}{::}{PASSWDLINE}}\ ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}" .else client_send = "<; ${if !eq{PASSWDLINE}{}\ {}fail}\ ; ${extract{1}{::}{PASSWDLINE}}\ ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}" .endif šeit: .ifdef DCconfig_local nonlocal: debug_print = "R: nonlocal for $local_part@$domain" driver = redirect domains = ! +local_domains allow_fail data = :fail: Mailing to remote domains not supported no_more .endif
  3. domā labot php.ini? patreiz: [mail function] ; For Win32 only. SMTP = localhost smtp_port = 25 ; For Win32 only. ;sendmail_from = [email protected] ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). sendmail_path = /usr/sbin/sendmail -t -i ; Force the addition of the specified parameters to be passed as extra parameters ; to the sendmail binary. These parameters will always replace the value of ; the 5th parameter to mail(), even in safe mode. ;mail.force_extra_parameters = pieliekot klāt useri un pass?
  4. Es saprotu, ka tur var atrast kaudzēm visādas informācijas, bet tāpēc es pateicu "paldies", tam , kas palīdzēs. Tad jau var izņemt visu forumu un norādīt linku uz googli;) Kāds ir tavs ieteikums? Sanāk, ka mana lapa ir spam listē?
  5. Sveicināti, Laiku atpakaļ ir uzradusies kļūda, ka no servera nesūta ēpasta ziņojumus. Agrāk visus ēpastu sūtija ļoti labi. Atverot mail/www-data var redzēt, ka visi ziņojumi tiek bloķēti un netiek nosūtīti, piemēram,: From MAILER-DAEMON Wed Jul 14 15:20:19 2010 Return-path: <> Envelope-to: www-data@zip Delivery-date: Wed, 14 Jul 2010 15:20:19 -0400 Received: from Debian-exim by zip with local (Exim 4.69) id 1OZ7VD-0003r0-NT for www-data@zip; Wed, 14 Jul 2010 15:20:19 -0400 X-Failed-Recipients: [email protected] Auto-Submitted: auto-replied From: Mail Delivery System <Mailer-Daemon@zip> To: www-data@zip Subject: Mail delivery failed: returning message to sender Message-Id: <E1OZ7VD-0003r0-NT@zip> Date: Wed, 14 Jul 2010 15:20:19 -0400 This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] Mailing to remote domains not supported ------ This is a copy of the message, including all the headers. ------ Return-path: <www-data@zip> Received: from www-data by zip with local (Exim 4.69) (envelope-from <www-data@zip>) id 1OZ7VD-0003qy-Ma for [email protected]; Wed, 14 Jul 2010 15:20:19 -0400 To: [email protected] Subject: =?UTF-8?B?VGV2aSBrxIFkcyBzYW3Eq8S8b2ph?= MIME-Version: 1.0 Content-type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit From: Labotsmansdomēns.lv <[email protected]> Reply-To: Labotsmansdomēns.lv <[email protected]> Message-Id: <E1OZ7VD-0003qy-Ma@zip> Date: Wed, 14 Jul 2010 15:20:19 -0400 Sveiki, ZaC, vēstules teksts Varbūt kādam ir pieredze, kur varētu būt kļūda? Palasiet ievadīto ziņojumu. Nesūta arī uz ēpasta adresēm, kuras es 100% zinu, ka ir īstas. Paldies
  6. Man head daļā ir "<script type="text/javascript" sr .js"></script>" teksta scripts, kurš ielādējās pie katra refreša. Atceros senāk izmantoju vienu koda gabalu (Aizmirsis līdz nullei, kautkas ar "if atļauja ja konkrētā lapa"), ar kuru varēja precizēt, tieši ar kādu lapu kopā viņam būtu atļauja ielādēties, bet izmantoju body daļā. Vai ir iespējams head daļā regulēt šādi? Kāds atcerās? tnx
  7. Izdevās sapludināt pareizi a.daļa pilnā platumā. Varbūt zini ar kādām funkcijām izveidot, lai varētu, ja var ka b.daļa garāks teksts neaplauztos pie c.daļa sākuma , bet pie c.daļa beigām, bet teksts, kas ir c.daļa iekļautos tikai c.daļā?
  8. <TABLE BORDER=1 WIDTH="200" HEIGHT="200"> <TR> <TD WIDTH="200">a.dala</TD> </TR> <TR> <TD>b.dala</TD> <TD>c.dala</TD> </TR> </TABLE> Kā var izveidot, lai tabulas daļa "a.dala" aizņemtu visus 200px platumā +ievietotais teksts (garāka rinda) "b.daļā" turpinātos arī c.daļa tabulā,lai neaplauztu tekstu jau pie "c.daļa" sākuma,bet c.daļa ievietotais teksts atrastos tikai "c.daļa" tabulas daļā. Ceru ir saprotams Ja ir kāda ideja paldies
  9. Labdien, Man ļoti svarīgi ir atrast vienu kodu no google pakalpojumiem. Man mājaslapai vajag atrast informāciju, kur var dabūt tādu kodu kartei kāds tas ir zip[punkts]lv mājaslapā, kur var pievienot objekta atrašanos vietu. Interesē tieši šads skripts, kur pats norādi kartē atrašanos vietu, nevis ierakstot adresi. Paldies ceru kādam ir kāda informācija.
  10. Sveicināti, Jau ilgāku laiku lietoju google produktu analystic un ir nepieciešamība nedaudz pielāgot to savai web lapai. Man interesē ievietot savā mājaslapā unikālo hostu publisku apmeklējumu skaitītāju var būt arī kopā ar hitiem. Tā, lai tas uzrādītu google analystic konta datus par unikālajiem apmeklējumiem vai unikālie apmeklējumi ar hitiem. Skatījos pa googli redzēju tikai wordpresei šādu uzlabojumu, bet man ir pavisam ne cms sistēma, kur tas neder. Zinot internetu loti iespējams , ka kāds būs kautko izdomājis pa šo tēmu. Varbūt kāds var palīdzēt? My link Ja gadās, ka neēsmu online 24/7 droši rakstiet es te viesojos bieži un sniegšu atbildi pēc iespējas ātrāk. Paldies
  11. Sveicināti. Var kāds palīdzēt kā pareizi ievietot .fla failā url adresi uz kurieni būtu jāved gatavam .swf failam. Es lietoju Macromedia p. mx 2004 . >>> ATRISINĀJU SAVIEM SPĒKIEM<<< Paldies par uzmanību ;)
  12. Viss kārtībā, man sanāca 1,5 dienu gaidīt, kas nebija pieņemams manam darba stilam , ka visam jābūt tulīt un tagad ;)
  13. Ir uzinstalēts google.lv produkts analystic web vietnē. Analystic profilā uzrāda , ka status ir ok. Rezultāts , ka stāv visi ienākošo unikālo un hitu skaits uz nullēm , laigan patiesībā ir personas , kas ienāk vietnē. Kur varētu būt problēma? Paldies
  14. Atradu izveidoju nedaudz savādāku lietu ar: text-transform: uppercase
×
×
  • Create New...